Rotary Encoders
Rotary Transducers
Absolute Encoders
FIAMA rotary encoders are the same profile as several of the OP position indicators, offering a simple conversion to 50-500ppr to provide position feedback to a remote display, motor drive, controller, PLC, etc.
FIAMA rotary transducers are potentiometric transducers that provide an electronic linear output from a mechanical rotation motion. The transducer is primarily a precision rotary potentiometer that, through a multi-turn transmission system, receives the motion from a drive shaft and converts to a useable potentiometer output (or 0-10V or 4-20mA linear signal). This, in turn, offers a very simple absolute encoder position signal, without a proprietary or expensive position signal protocol.
PR
Rotary potentiometer transducer
The FIAMA PR10 and PR20 rotary transducers are potentiometric transducers that provide an electronic linear output from a mechanical rotation motion. 3D DRAWING AVAILABLE UPON REQUEST.
EN
Hollow shaft encoder
FIAMA EN Series encoders are hollow shaft encoders that turn a rotating motion into a digital pulse signal i.e. line driver output. 3D DRAWING AVAILABLE UPON REQUEST.
ENP6
Hollow shaft encoder for OP position indicator
The ENP6 is a hollow shaft encoder that turns a rotating motion into a digital pulse signal i.e. line driver or push-pull signal output. It is intended to be installed on the OP6, OP7, or EP7 position indicator. 3D DRAWING AVAILABLE UPON REQUEST.