Programmable position indicator to be combined with the mangetic ring AM for rotative measure and integrated serial connection, which is used for linear or angular measurements. It is easy to install for a fast, efficient and safe format changeover.
Main features:
- Compact and robust case made of anodized aluminum.
- The display has 7,5mm-high-digits, which allow excellent readability also from a distance.
- Installation possibilities: version A for horizontal shafts with optimal visibility when positioned at a height between 50cm and 120cm.
Main functions:
- Display with backlight and two rows: the first row shows the current position and the second row shows the target position. The target value is sent to the unit via a serial interface from the PLC, allowing manual format changeover by the operator using a handwheel.
- 2 LEDs, 1 green and 1 red, guide the operator until the correct position has been reached
- All parameters are freely programmable via the integrated RS485 interface for networking with the PLC or a remote supervision system.
Combinable tools:
Converter for additional communications as Profinet, EtherNet/IP, Powerlink, EtherCat.
Product features
| Range | 5 digit LCD display, 10mm digits |
|---|---|
| Resolution | Programmable |
| Rugged | Shock-proof welded technopolymer housing |
| Construction | Anodized Aluminum, Magnetic rotation Sensor |
| Bus | RS485 MODBUS RTU |
| Communication | Serial Connection |
Overall Dimensions
PROGRAMMABLE INDICATOR «F4RS-AM»
CONNECTOR «M12T» (standard)
CONNECTOR «M12Y» (optional)
SENSOR «MT» (standard)
SENSOR «SM12» (optional)
MAGNETIC RING «AM»
Mounting Position
MOUNTING POSITION “A”
