Product index

Mechanical Transmissions 66/22   Gearbox (Mini)
These small gearboxes are suitable for the transmission of rotating motions between two shafts at right-angles.
Mechanical Transmissions 66/4   Angular with 8mm shaft
Gearbox (straight or optional spiral bevel) for transmission of rotating motion between shafts at right angles. Stainless versions are also available upon request. Contact Automation Continuum for a shaft variant not listed.
Mechanical Transmissions 66/5   Angular with 8 or 10mm shafts
Gearbox (straight or optional spiral bevel) for transmission of rotating motion between shafts at right angles. Stainless versions are also available upon request. Contact Automation Continuum for a shaft variant not listed.
Mechanical Transmissions 66/6   Angular with 14mm or 1/2
Gearbox (straight or optional spiral bevel) for transmission of rotating motion between shafts at right angles. Stainless versions are also available upon request. Contact Automation Continuum for a shaft variant not listed. 3D DRAWING AVAILABLE UPON REQUEST.
Mechanical Transmissions 66/8   Angular with 20mm shaft
Gearbox (straight or optional spiral bevel) for transmission of rotating motion between shafts at right angles. Stainless versions are also available upon request. Contact Automation Continuum for a shaft variant not listed.
Displays and Positioners A3X   3-axis incremental display
Mechanical Transmissions AF   Flexible Shafts
Flexible spring shafts for the transmission of rotational motion. Pressed steel terminal couplings.
Hand Wheel and Indicators AL   Induction tachometer with flange
Suitable for instant measuring of rotation or translation speed.
Hand Wheel and Indicators AM4202   Hand Held Anemometer
Hand held digital anemometer used to measure the air speed from 0.4 to 30 m/s, with m/s, Km/s, f/min, knots display and the temperature from 0°C to 60°C or 32 to 140°F. The transducer is made up of a shovel wheel, rotating on law friction ball bearings that allows accurate measures also with low speeds. Measures are visualized on an easy reading large liquid crystal display. Other features av...   more...
Hand Wheel and Indicators AP90   Analog Indicator for Panel Mount
Mechanical indicator for panel mount to display measures, angles, offsets, with analog indication. The analog pointer moves a fraction of a turn with each rotation of the drive shaft. Also referred to as a rotation counter, position counter or digital counter.
Hand Wheel and Indicators AP90N   Analog-Digital Indicator Panel Mount
Mechanical indicator for panel mount to display measures, angles, offsets, with analog-digital indication. The reading is presented using a 5-digit counter (red digits to indicate decimals) and by a graduated control dial. The analog pointer completes one turn with each rotation of the drive shaft.
Hand Wheel and Indicators APFL   Analog-Digital Indicator Flange Mount
Mechanical indicator for panel mount to display measures, angles, offsets, with analog-digital indication. The reading is presented using a 4-digit counter (red digits to indicate decimals) and by a graduated control dial. The analog pointer completes one turn with each rotation of the drive shaft.
Mechanical Accessory AT   Flexible Shaft
Flexible steel shaft.
Mechanical Accessory BF 14   Reducing Bushing 14mm OD
for use with OP3 CALL FOR IMPERIAL SIZE BUSHINGS
Mechanical Accessory BF 20   Reducing Bushing 20 mm OD
for use with OP7 OP6 OP5 PR20. CALL FOR IMPERIAL SIZE BUSHINGS
Mechanical Accessory BF 25   Reducing Bushing 25 mm OD
for use with OP6 OP7 OP9
Mechanical Accessory BF 30   Reducing Bushing 30 mm OD
for use with OP9 OP12
Fill Level Controls CAP80   Continuous capacitive level measurement
******* DISCONTINUED ITEM ******** Measure fill level for tanks containing liquids (water, water solutions, food liquids, etc.) and solid materials (flours, granulates, powders, etc.). The measure probe, cable or shaft, is immersed in the material: the electrical capacitance present between the probe and the tank is measured, calculated through a microprocessor and converted in continuous analog...   more...
Electronic Accessory CONN DIR IM60/IM360   Accessory
Fill Level Controls CP85   Level Control
The CP85 is a level control, simple and economical; the case is fixed directly to the tank, by the means of flange or threaded joint 1” gas. Inside, there is a membrane that forms a pressure chamber to connect to the pneumatic outlet with a 1/2” pipe (rubber, plastic, metal, according to product) whose end is the min. or max. level point. Air pressure produced by the level increasing presses...   more...
Hand Wheel and Indicators CRO   Tachometer with hour meter
Applied to agricultural machines or to industrial ones, it indicates the number of motor revolutions, the number of the direct drive and the total working hours. Solid and accurate it is fitted with flexible shaft and on request with the angular transmsission.
Hand Wheel and Indicators DT2236   Hand Held Digital tachometer photo-contact
Hand held digital tachometer - Measures rotational or linear speed with mechanical or photo coupling. Automatically stores Last, Max & Min values. Carry bag and durable design make this ideal for field measurements,
Hand Wheel and Indicators DT901   Hand Held Digital tachometer contact
Hand held digital tachometer - Measures rotational or linear speed with mechanical coupling. Automatically stores Last, Max & Min values. Carry bag and durable design make this ideal for field measurements,
Absolute and Incremental Wire Draw EF   Wire optical incremental (<1m)
Wire incremental encoder translates linear motion into coded digital pulses: EF use an optical encoder with 256 pulses per 102 mm. of extended wire (0,1 mm. the resolution of quadrature count). These instrument are easy to integrate for measuring linear or angular motion on machine tools, automatic-, wood-, marble-, glassworking machinery, cylindrical-, hydraulic-, pneumatic stroke, shutiers et...   more...
Absolute and Incremental Wire Draw EF.   Wire optical incremental (1 to 3m)
Wire incremental encoder translates linear motion into coded digital pulses: EF use an optical encoder with 600 pulses per 240 mm. of extended wire (0,1 mm. the resolution of quadrature count). These instrument are easy to integrate for measuring linear or angular motion on machine tools, automatic-, wood-, marble-, glassworking machinery, cylindrical-, hydraulic-, pneumatic stroke, shutiers et...   more...
Absolute and Incremental Wire Draw EFA   Wire optical incremental (>3m)
Wire incremental encoder translates linear motion into coded digital pulses: EF use an optical encoder with 800 pulses per 320 mm. of extended wire (0,1 mm. the resolution of quadrature count). These instrument are easy to integrate for measuring linear or angular motion on machine tools, automatic-, wood-, marble-, glassworking machinery, cylindrical-, hydraulic-, pneumatic stroke, shutiers et...   more...
Absolute and Incremental Wire Draw EFM   Wire magnetic incremental
Wire incremental encoder translates linear motion into coded digital pulses: EFM use a magnetic encoder with 2500 pulses per 100 mm. of extended wire (0,01 mm. the resolution with quadrature count). These instrument are easy to integrate for measuring linear or angular motion on machine tools, automatic-, wood-, marble-, glassworking machinery, cylindrical-, hydraulic-, pneumatic stroke, shutie...   more...
Hand Wheel and Indicators EN90   Electronic Handwheel
Field programmable position indication for process control and quick changeover. Also referred to as a rotation counter, position counter or digital counter.
Position Indicators EP25L   5-Digit with Side View
Side view field programmable position indication for process control and quick changeover. Also referred to as a rotation counter, position counter or digital counter.
Position Indicators EP7   5-Digit with 20mm or 3/4
Field programmable position indicator for process control and quick changeover. Also referred to as a rotation counter, position counter or digital counter. 3D DRAWING AVAILABLE UPON REQUEST.
Displays and Positioners F1X5   Inc or SSI input with relay and serial output
The F1X5 is a multifunction microprocessor 6-digit display unit with SSI absolute or incremental transducers such as optical or mag encoder, magnetic ban, or proximity sensor input. Field scalable display. Supports absolute/relative dimension, tool diameter offset compensation, etc. The displayed value is compared with 2 target values that can be set for the enabling of as many relays, the s...   more...
Displays and Positioners F2X   High freq inc input with relay and serial output
The F2X is a multifunction microprocessor 6-digit display unit with incremental transducers such as optical or mag encoder, magnetic ban, or proximity sensor input. Field scalable display. Supports absolute/relative dimension, tool diameter offset compensation, etc. The displayed value is compared with 2 target values that can be set for the enabling of as many relays, the status of which is...   more...
Displays and Positioners F3X   Incremental input with relay output
The F3X is a multifunction microprocessor 5-digit display unit with incremental transducers such as optical or mag encoder, magnetic ban, or proximity sensor input. Field scalable display. Supports absolute/relative dimension, tool diameter offset compensation, etc. The displayed value is compared with 2 target values that can be set for the enabling of as many relays, the status of which is...   more...
Displays and Positioners F7   Encoder With Display
The FIAMA F7 is a multifunction, programmable, electronic display unit with sensor. Battery powered with four year battery life. For use with FIAMA's magnetic band or magnetic rotary ring.
Mechanical Transmissions FAP(V1)   Steel flex shaft - loose sheath
These are flexible shafts made of a spring shaft and a protection sheath, employed for the transmission of rotating motions. Flexible shafts with free coupling terminals, in steel, as per drawing.
Mechanical Transmissions FAP(V2)   Steel flex shaft - threaded sheath
These are flexible shafts made of a spring shaft and a protection sheath, used for the transmission of rotating motions. Flexible shafts with steel coupling terminals, as per drawing.
Mechanical Transmissions FAP(V3)   Steel flex shaft - sliding sheath
These are flexible shafts made of a spring shaft and a protection sheath, used for the transmission of rotating motions. Flexible shafts with sliding coupling terminals, in steel. They are built according to the required length (L).
Mechanical Transmissions FAP(V4)   Steel flex shaft - polyamide sheath
These are flexible shafts made of a spring shaft, and a protection rilsan-tube used for the transmission of rotating motions. Flexible shafts with steel coupling terminals, as per drawing.
Mechanical Accessory FL   Spacer Flange
Provides clearance for pillow block or bearing. 3D DRAWING AVAILABLE UPON REQUEST.
Mechanical Accessory FL_B   Shaft Block Flange
Mount behind OP indicator to lock shaft into position. Imperial bore sizes available upon request. 3D DRAWING AVAILABLE UPON REQUEST.
Absolute and Incremental Rotary Transduc IM   Inclinometer with analog output
Transducer used to monitor listing angle with reference to earth's axis. Inclinometer employs a solid state sensor, vibration and shock-resistant, without moving parts. Compact and easy to mount. Main applications are: measure of inclination angle of cutting-blade, crane, level control of platform etc.
Electronic Accessory IM60/360 CONN   Accessory
Hand Wheel and Indicators IP/IF   Handwheel with position indicator
These are motion handwheels with a gravity or fixed reaction indicator included, to measure adjustments (angles, shiftings, speed, etc.) on a control dial with graduated circular scale. The dials measure is given by the two pointers: the red pointer carries out a complete turn at every rotation of the drive shaft, and at the same time, the black pointer makes a rotation fraction. The turns that t...   more...
Mechanical Transmissions MAR40   Screw Jack
The FIAMA series of screw jacks is a modular mechanical system, for a complete and versatile solution, which transforms rotary movements into linear 'push/pull' movements.
Mechanical Transmissions MAR50   Screw Jack
The FIAMA series of screw jacks is a modular mechanical system, for a complete and versatile solution, which transforms rotary movements into linear 'push/pull' movements.
Absolute and Incremental Linear MAT PA50/20   Absolute Encoder
Absolute and Incremental Linear MT-MTV-MTP   Magnetic Encoder
Hand Wheel and Indicators OL2   Position indicator for panel mount
Mechanical digital indicator for direct reading of measures. Motion is transmitted by means of an output shaft directly fitted on the back of the instrument or connected through a flexible shaft. A gear ratio with appropriate ratio conveys the motion to the counter for display.
Position Indicators OP10   2 5-Digit displays
This is a digital indicator with two 5-digit counters to adjust and directly read a motion obtained by a drive shaft rotation. Also referred to as a rotation counter, position counter or digital counter.
Position Indicators OP12   Position Indicator
This is a digital indicator with two 5-digit counters to adjust and directly read a motion through a drive shaft rotation.
Position Indicators OP2   3-Digit with 12mm hole
Mechanical position indicator for process control and quick changeover. Also referred to as a rotation counter, position counter or digital counter. CUSTOM RATIOS ARE AVAILABLE - if you do not see your desired count ratio under "Specify your part" below, please contact us with your request. All metallic parts are stainless steel.
Position Indicators OP3   4-Digit with 14mm or 1/2
Mechanical position indicator for process control and quick changeover. Also referred to as a rotation counter, position counter or digital counter. CUSTOM RATIOS ARE AVAILABLE - if you do not see your desired count ratio under "Specify your part" below, please contact us with your request. 3D DRAWING AVAILABLE UPON REQUEST.
Position Indicators OP5   5-Digit with 20mm hole
Mechanical position indicator for process control and quick changeover. Also referred to as a rotation counter, position counter or digital counter. Consider OP7 for new designs. CUSTOM RATIOS ARE AVAILABLE - if you do not see your desired count ratio under "Specify your part" below, please contact us with your request.
Position Indicators OP6   5-Digit with 20mm hole
Mechanical position indicator for process control and quick changeover. Also referred to as a rotation counter, position counter or digital counter. Consider the OP7 over the OP6 for new designs.
Position Indicators OP7   5-Digit with 25mm or 1
Mechanical position indicator for process control and quick changeover. Also referred to as a rotation counter, position counter or digital counter. CUSTOM RATIOS ARE AVAILABLE - if you do not see your desired count ratio under "Specify your part" below, please contact us with your request. 3D DRAWING AVAILABLE UPON REQUEST.
Position Indicators OP9   5-Digit with 35mm hole
Mechanical position indicator for process control and quick changeover. Also referred to as a rotation counter, position counter or digital counter. CUSTOM RATIOS ARE AVAILABLE - if you do not see your desired count ratio under "Specify your part" below, please contact us with your request.
Absolute and Incremental Linear PAK   Linear Potentiometer
Absolute and Incremental Wire Draw PF100   Wire linear potentiometer
Wire potentiometer position transducer that translates linear motion into resistance variation. Available with a stroke lengths of 60 mm to 980mm. Constructed with a precision rotating potentiometer actuated by the winding or unwinding of a stainless steel wire. Low cost and easy integration. Measure linear or angular motions on machine tools, automatic-,wood-, marble-, glass-working mach...   more...
Absolute and Incremental Wire Draw PF1000   Wire linear potentiometer
Wire potentiometer position transducer that translates linear motion into resistance variation. Available with stroke lengths of 1100 mm or 2200mm. Constructed with a precision rotating potentiometer actuated by the winding or unwinding of a stainless steel wire. Low cost and easy integration. Measure linear or angular motions on machine tools, automatic-,wood-, marble-, glass-working machinery...   more...
Absolute and Incremental Wire Draw PF80   Crack Measurement Monitor with Data Logger
Crack measurement monitor with integrated data logger used to monitor cracks, joints and linear displacements by recording displacement and ambient temperature values. Based on a rotary precision potentiometer which is driven by the winding/unwinding of a stainless steel wire with 80mm stroke. It is possible to add an extension to the steel cable to monitor points which are distant. The crack...   more...
Absolute and Incremental Wire Draw PFA   Wire linear potentiometer
Wire potentiometer position transducer that translates a linear motion into an analog output. Available with a strokes lengths of 3200 mm to 12200mm. They are made of a precision rotating potentiometer operated by a winding or unwinding stainless steel wire. Available outputs include resistance (0-10kOhms), current (4-20mA), voltage (0-10vdc) and serial (RS485, MODBUS, PROFIBUS, CANopen). Measu...   more...
Mechanical Accessory PM   Movement Knob
The motion-knob is directly assembled on the shaft of the indicators OP2, OP3, OP6, OP6F25, OP6, OP6F25, OP7
Absolute and Incremental Rotary PR10   Geared Potentiometer
Rotation of a shaft is transferred through a gear set to a precision rotating potentiometer. The potentiometers are available with 1, 3, 5, or 10 revolutions with a transmission gear ratio between the drive shaft and the potentiometer. The transmission is provided with a clutch for the protection of the potentiometer. Appropriate specification requires total number of revolution in the range of ...   more...
Absolute and Incremental Rotary PR20   Geared Potentiometer
Rotation of a hollow shaft is transferred through a gear set to a precision rotating potentiometer, allowing for a simple yet effective absolute encoder solution. The potentiometers are available with 1, 3, 5, or 10 revolutions with a transmission gear ratio between the drive shaft and the potentiometer. The transmission is provided with a clutch for the protection of the potentiometer. Appropri...   more...
Electronic Accessory PR20 Conn   mating connector
Mechanical Transmissions RD26   Right Angle Gear Reducer
The RD26 is a highly compact (26mm²) reducer for various industrial applications; in particular for automation and robotics. Applicable also to motors. Housing is made of anodized aluminum and shafts made of PR80 steel with Pronox surface hardening treatment (high wear and fatigue resistance plus friction reduction and significant increase in corrosion resistance).
Mechanical Transmissions RINV   Flanged angular transmission
The RINV-OP is a flanged angular transmission that, combined with a position indicator type “OP”, allows the machine builder to reorient adjustment shafts to a more comfortable position. Contact Automation Continuum for a shaft variant not listed. 3D DRAWING AVAILABLE UPON REQUEST.
Fill Level Controls SC   Capacitive cylindrical for solids and liquids
Capacitance sensors are widely used as min. and max. level controls for fluids, powders or granulars, inside tanks and propper chutes. In some cases they are preferred for their building compactness and small dimensions that simplify mounting beside the possibility to be connected to programmable controllers.
Fill Level Controls SE   Level Control
The level controls propeller indicators SE are employed for level control in tanks and silos that contain powders or granulars. The indicator’s working is very simple: a synchronous motor that rotates at low speed activates a propeller placed inside the tank to be controlled. In lack of material the motor is under voltage and the propeller revolves. The presence of material round the propeller b...   more...
Fill Level Controls SEM   Level Control
The level controls propeller indicators SEM are employed for level control in tanks and silos that contain powders or granulates. The indicator’s working is very simple: a synchronous motor that rotates at low speed activates a propeller placed inside the tank to be controlled. In lack of material the motor is under voltage and the propeller revolves. The presence of material round the propeller...   more...
Geared Motors Servo.D   Axis Positioning Unit
Geared Motors Servo.M   Axis Positioning Unit
Hand Wheel and Indicators SIMPLEX   Sliding shaft indicator
Mechanical digital indicator with sliding shaft for direct reading of the distance between two elements of a machine. By dragging the shaft, it is possible to read the value corresponding to the motion.
Hand Wheel and Indicators SIMPLEX30   Sliding shaft indicator
This mechanical digital indicator with sliding shaft is used for the direct reading of the distance between two elements of the machine. By dragging the shaft, it is possible to read the value corresponding to the carried out motion.
Fill Level Controls SL   Level Control
The SL level controls are employed for the level control in tanks or silos that contain powders or granulars. The indicator’s working is very simple: a synchronous motor that rotates at low speed activates a propeller placed inside the tank to be controlled. In lack of material the motor is under voltage and the propeller revolves. The presence of material round the propeller bridles the rotatio...   more...
Hand Wheel and Indicators SL4011   Hand Held Phonometer
Hand held digital sound level meter designed to support acoustic detecting by security technicians according to IEC 651 type 2. Wide liquid crystals display for an easy and immediate reading with sound intensity range from 30dB to 130dB according to the toning down curves in a frequency field from 31.5 Hz to 8 KHz. Other features of the instrument are: slow and fast measures, max.value storage ...   more...
Fill Level Controls SM85   Level Control
The SM85 is a simple and economical instrument suitable for the minimum and maximum level control inside silos or hoppers that contain no sticky mate- rials, powders or granulars like rice, corns, plastics, coffee, sand, lime, etc. Working is very simple: the pressure practiced by material on membrane activates a trigger.Trigger sensibility is adjustable by a screw placed on the instru- ment tap....   more...
Hand Wheel and Indicators TC   Induction tachometer
Suitable for instant measuring rotation or translation speed. Accurate reading on linear scale. Full scale range: 150 - 3000 r.p.m. Ratio between revolutions and dial indication on request. Dial with double-direction of rotation. Multiple scale dial.
Mechanical Transmissions Terminal   Coupling
Steel coupling termination for flexible shafts
Hand Wheel and Indicators TL   Induction tachometer
Suitable for instant measuring of rotation or translation speed.
Hand Wheel and Indicators TM916   Hand Held Thermometer
Two channel hand held digital thermometer with K type thermocouples input in order to measure temperatures within -50°C and 13230°C (-50° to 1999°F). Supports two inputs to measure two temperatures at the same time, commutators to select the resolution (0.1 or 1 °C/°F) and the measure unit (°C/°F ) wanted. Wide range of temperatures probes available, small dimensions and the ease to use m...   more...
Mechanical Transmissions TR   Flexible Shaft
flexible shafts used for the motion transmission to tachometers or position indicators.
Hand Wheel and Indicators TS   Induction tachometer
Suitable for instant measuring of rotation or translation speed.
Mechanical Accessory V.M   Crank handle with folding handle
Mechanical Accessory V.R   Control handwheel with folding handle
Displays and Positioners V3   Analog input with optional relay output
The V3 series are multifunction microprocessor display units with resistance, voltage, or current input from transducer. Field scalable display. Supports absolute/relative dimension, tool diameter offset compensation, etc. The displayed value is compared with 3 target values that can be set for the enabling of as many relays, the status of which is displayed through panel LEDs. The instrume...   more...
Displays and Positioners V4   Analog input various outputs
The V4 series are multifunction microprocessor display units with resistance, voltage, or current input from transducer. Field scalable display. Supports absolute/relative dimension, tool diameter offset compensation, etc. The displayed value is compared with upto 3 target values that can be set for the enabling of as many switches, the status of which is displayed through panel LEDs. Can b...   more...
Displays and Positioners VE6   Analog input 16 bit
The VE6 series are multifunction microprocessor display units with resistance, voltage, or current input from transducer. high resolution 16-bit A/D conversion. Field scalable display. Supports absolute/relative dimension, tool diameter offset compensation, etc. The displayed value is compared with up to 2 target values that can be set for the enabling of as many switches, the status of which is...   more...